| Panasonic-7818/24/30/35/45/50 |
НАЗАД |
| User error |
| NOTE: XXXX will appear in message display. |
| Error code |
Message |
Item |
| Uo |
INSERT KEY or INPUT IDENTIFICATION CODE XXX |
Key counter failure (option) or Access code number was not input |
| U1 |
CLOSE FRONT PANEL |
Front cover failure |
| U4 |
CLOSE SORTER |
Sorter failure (option) Sorter won't close securely. |
| U5 |
CLOSE DUPLEX UNIT |
Duplex unit failure |
| U6 |
CLOSE RIGHT SIDE PANEL |
Copier paper feed cover failure |
| U7 |
CLOSE RIGHT SIDE PANEL |
System console (option) paper feed cover failure |
| U10 |
CLOSE ADF |
ADF (option) failure |
| U11 |
CLEAR SORTER BINS |
Sorter copy paper removal NOTE: When clearing U11, all paper is removed from bins. |
| U12 |
ADD STAPLES |
Sorter with stapler |
| U13 |
ADD TONER |
Toner level detection |
| U14 |
REPLACE WASTE TONER BOTTLE |
Waste toner bottle full |
| U16 |
INSTALL DEVELOPER UNIT |
Developer unit is not installed |
| U17 |
— |
Sorter transport cover failure |
| U18 |
— |
Copy usage is upper limited. |
| oF |
SORTER FULL-EMPTY PRESS MODE KEY |
If too many copies in bin or too many bins selected.
Remove copies and press the each sorter mode key on the touch panel. |
| |
Not ready (Red LED flashes) |
Power saving The ready indicator will light and the other displays are turned OFF.
To clear the Stand-by mode, press the Print key. |
| |
Not ready (Red LED lights) |
Auto off The ready indicator will flash and the other displays are turned OFF.
To clear the Power saving mode, press the Print key. |
| Paper Jam |
| Jam read code |
Condition |
| J00 |
The registration roller paper pass sensor does not detect paper within a predetermined time after sheet bypass paper feed roller starts rotating. |
| J01 |
The copier upper paper feed unit paper pass sensor 1 does not detect paper within a predetermined time.
When the duplex unit is not installed:
After copier upper stage paper feed roller starts rotating.
When the duplex unit is installed:
After duplex unit paper feed roller starts rotating. |
| J02 |
The copier lower paper feed unit paper pass sensor 2 does not detect paper within a predetermined time after copier lower stage paper feed roller starts rotating. |
| J03 |
Optional system console upper paper feed unit paper pass sensor 1 does not detect paper within a predetermined time after upper stage paper feed roller starts rotating. |
| J04 |
Optional system console middle paper feed unit paper pass sensor 2 does not detect paper within a predetermined time after middle stage paper feed roller starts rotating. |
| J05 |
Optional system console lower paper feed unit paper pass sensor 3 does not detect paper within a predetermined time after lower stage paper feed roller starts rotating. |
| J06 |
When optional LCC is installed. The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after LCC pick-up roller starts rotating. |
| J07 |
Paper feeding from the copier lower paper tray or optional LCC or system console:
The copier upper stage paper pass sensor 1 does not detect paper within a predetermined time after copier lower stage paper pass sensor detected paper. |
| J08 |
Paper feeding from the optional system console upper stage:
The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console upper stage paper pass sensor 1 detected paper. |
| J09 |
a) Paper feeding from the optional system console middle stage:
The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console middle stage paper pass sensor 2 detected paper.
b) Paper feeding from the optional system console lower stage:
The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console lower stage paper pass sensor 3 detected paper. |
| J10 |
Not used |
| J11 |
The copier upper stage paper pass sensor 1 is detecting paper within a predetermined time.
a) Paper feeding from copier upper stage:
b) Paper feeding from duplex unit. |
| J12 |
Paper feeding from copier lower stage:
The copier lower stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper. |
| J13 |
Paper feeding from optional system console upper stage:
Upper stage paper pass sensor 1 is detecting paper within a predetermined time after first detecting paper. |
| J14 |
Paper feeding from optional system console middle stage:
Middle stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper. |
| J15 |
Paper feeding from optional system console lower stage:
Lower stage paper pass sensor 3 is detecting paper within a predetermined time after first detecting paper. |
| J16 |
Paper feeding from optional LCC:
The copier lower stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper. |
| J17 |
When fixed quantity paper passed on the registration roller paper pass sensor.
a) The copier paper pass sensor 1 or 2 is detecting paper.
b) Optional paper pass sensor 1 or 2 or 3 is detecting paper. |
| J18 |
Paper feeding except from sheet bypass:
The registration roller paper pass sensor does not detect paper within a predetermined time after copier upper stage paper pass sensor 1 detected paper. |
| J19-20 |
Not used |
| J21 |
Copier upper stage paper pass sensor 1 is detecting paper. |
| J22 |
Copier lower stage paper pass sensor 2 is detecting paper. |
| J23 |
Optional system console upper paper pass sensor 1 is detecting paper. |
| J24 |
Optional system console middle paper pass sensor 2 is detecting paper. |
| J25 |
Optional system console lower paper pass sensor 3 is detecting paper. |
| J26-29 |
Not used |
| J30 |
Paper feeding from sheet bypass:
The registration roller paper pass sensor is detecting paper within a predetermined time after sensor detected paper. |
| J31 |
Paper feeding except from sheet bypass:
The registration roller paper pass sensor is detecting paper within a predetermined time after registration roller starts rotating. |
| J32 |
Not used |
| J33 |
The registration roller paper pass sensor is detecting paper. |
| J34-39 |
Not used |
| J40 |
The paper exit sensor does not detect paper within a predetermined time after registration roller starts rotating. |
| J41 |
The paper exit sensor is detecting paper within a predetermined time after sensor detected paper. |
| J42 |
The paper exit sensor is detecting paper. |
| J43-49 |
Not used |
| J50 |
Transport operation for duplexing The duplex unit paper pass sensor 1 does not detect paper within a predetermined time after copier paper exit sensor detected paper. |
| J51 |
Transport operation for duplexing The duplex unit paper pass sensor 1 is detecting paper within a predetermined time after sensor detected paper. |
| J52 |
Transport operation for duplexing The duplex unit paper pass sensor 2 does not detect paper within a predetermined time after paper pass sensor 1 detected paper. |
| J53 |
Transport operation for duplexing The duplex unit paper pass sensor 2 is detecting paper within a predetermined time after sensor detected paper. |
| J54 |
The duplex unit paper pass sensor 1 is detecting paper. |
| J55 |
The duplex unit paper pass sensor 2 is detecting paper. |
| J56 |
The duplex unit paper detecting sensor does not detect paper after copies are fed into the duplex unit tray. |
| J57-59 |
Not used |
| J60 |
When the sorter is installed.
a) The sorter entry paper pass sensor does not detect paper within a predetermined time after copier paper exit sensor detected paper.
b) The sorter paper exit sensor does not detected paper within a predetermined time after sorter entry paper pass sensor detected paper.
c) The sorter entry or exit paper pass sensor is detecting paper.
d) For FA-S575 The sorter exit paper pass sensor does not detect paperwithin a predetermined time after sorter entry paper pass sensor detected paper.
e) For FA-S575 The sorter exit paper pass sensor is detecting within a predetermined time after sensor detected paper. |
| J70 |
When ADF is installed.
a) The ADF entry paper pass sensor does not detect paper within a predetermined time after ADF paper feed roller starts rotating.
b) The ADF entry paper pass sensor is detecting paper within a predetermined time after sensor detected paper.
c) The ADF entry paper pass sensor is detecting paper before using ADF. |
| J71 |
a) The ADF exit paper pass sensor does not detect paper within a predetermined time after ADF starts paper exit.
b) The ADF exit paper pass sensor is detecting paper within a predetermined time after sensor detected paper.
c) The ADF exit paper pass sensor is detecting paper before using ADF. |
| J72 |
(FA-A888)
a) The ADF exit paper pass sensor does not detect paper within a predetermined time after ADF starts reverse operation.
b) The ADF exit paper pass sensor is detecting paper within a predetermined time after sensor detected paper. |
| E1: Optical unit error |
| Code |
Function |
| E1-01 |
Optical unit scan operating |
| E1-20 |
Lens ratio operating |
| E1-21 |
Mirror ratio operating |
| E1-23 |
F8-02 mis-input |
| E1-32 |
Auto original density detection |
| E1-40 |
Optics fan motor (1) rotation |
| E1-41 |
Optics fan motor (2) rotation |
| E1-43 |
Optics fan motor (4) rotation |
| E2: Paper feed unit error |
| Code |
Function |
| E2-01 |
Lift motor rotation 1 (Copier upper tray) |
| E2-02 |
Lift motor rotation 2 (Copier lower tray) |
| E2-03 |
Lift motor rotation 3 (System console upper) |
| E2-04 |
Lift motor rotation 4 (system console middle) |
| E2-05 |
Lift motor rotation 5 (system console lower) |
| E2-06 |
Optional LCC lift operation (UP) |
| E2-07 |
Optional LCC lift operation (DOWN) |
| E2-10 |
System console motor rotation manual |
| E3: Developer unit and Hopper unit error |
| Code |
Function |
| E3-01 |
Toner bottle motor rotation |
| E3-03 |
Toner density sensor gain |
| E3-10 |
High voltage power supply leak (1) |
| E3-11 |
High voltage power supply leak (2) |
| E3-20 |
Main motor rotation |
| E3-21 |
Dust collection fan motor rotation |
| E3-22 |
Exhaust fan motor rotation |
| E3-23 |
Suction fan motor rotation |
| E3-30 |
Discharge lamp |
| E3-40 |
Copy density sensor output detection |
| E3-50 |
Transfer cleaner operation |
| E4: Fuser unit error |
| Code |
Function |
| E4-01 |
Fuser warm-up |
| E4-10 |
Exhaust fan motor (1) rotation |
| E4-11 |
Exhaust fan motor (2) rotation |
| E4-12 |
Exhaust fan motor (3) rotation |
| E5: System (+24V/+10V) error |
| Code |
Function |
| E5-01 |
Vp (+24V) line |
| E5-04 |
Vo (+10V) line |
| E5-10 |
+5V (for EPA) |
| E5-21 |
ADF communication abnormal |
| E5-22 |
Sorter communication abnormal |
| E5-23 |
Control panel communication abnormal |
| E5-41 |
Registration timing control circuit abnormal |
| E5-42 |
Total counter connection |
| E5-50 |
Communication error |
| E6: Duplex unit error |
| Code |
Function |
| E6-03 |
Paper length home position detecting sensor |
| E6-04 |
Paper width home position detecting sensor |
| E6-05 |
Paper detecting sensor |
| E7: Optional unit error *These errors are indicated when options are installed. |
| Code |
Function |
| E7-01 |
Sorter bin movement |
| E7-03 |
Transport belt motor failure |
| E7-06 |
Stapler drive motor failure |
| E7-07 |
Tamper drive motor failure |
| E7-10 |
ADF main motor rotation |
| E7-11 |
ADF sensors output abnormal (registration and original exit/reverse sensor) |
